Sterile ThermaSat™ 60 Polyester Wipers, Pre-Wetted with 70% IPA / 30% DI Water 7” x 8” (18 cm x 20 cm) - STX4303

ThermaSeal™ 60 is made from 100% polyester with a sealed edge, cleanroom laundered.

Constructed from 100% polyester creating a wiper ideal for spill control, cleaning, and solution application- 7” x 8” (18 cm x 20 cm) pre-wetted with 70% IPA / 30% WFI

• Designed for use on abrasive surfaces. This wiper will not easily snag or abrade releasing particles and fibers into the process or environment.
• Excellent chemical resistance for compatibility with a variety of solutions.
• Autoclave safe (dry wipers only!).
• ThermaSeal™ and ThermaSat™ wipers are packaged in easyto-open bags (perforated bag, slider bag or peel and reseal bag).
• ThermaSat™ products are prewet with 0.2 μm filtered 70% IPA / 30% DIW or 30% WFI for ease of use.
• ThermaSat™ wipers provide consistent, optimized cleaning efficiency with repeatable wetness and VOC levels.
• ThermaSat™ wipers are packaged in reclosable slider bags and peel-and-reseal bags reducing solution evaporation that preserves the consistent wiper wetness level.
• For aseptic manufacturing inside RABS and isolators, ThermaSat™ wipers also come in an additional VHP barrier foil bag providing protection for the product during the VHP
sanitizing process.
• Meets USP <797> and USP <800> wiper requirements.
• Individually lot coded for ease of traceability and quality control. 7” x 8” (18 cm x 20 cm) pre-wetted with 70% IPA / 30% WFI

Cleanroom Environment
• ISO Class 3 – 7
• Class 1 – 10,000
• EU Grade A – D